A foam archery target is a favorite among archers because it has the potential to withstand numerous arrow strikes. Also, it does not have the tendency to damage arrow heads when they enter and leave the target. To make your own at home, you will be needing foam boards, banding machine, wooden boards, rope, weights and heavy duty tape. Choose a high density foam that is between two and four pounds. You want this type of foam because it can exert more pushing power on the arrow, bringing it to a stop without mutilating the arrow itself. Polyethylene and ether foams are the most coarse foams used in this kind of project.
The first step in manufacture a foam archery target is to stack the foam boards on top of each other, this will form the core of your target. The number of layers you will use will depend on the size of the target you have in mind. This would also have to depend on how thick your boards are. Make sure you pile sufficient layers so that you'll come up with a reasonably-sized target that you can custom with. Use a banding engine so you can compress the material. The engine will also help you in applying a essential number of compression without requiring you too work a lot, it will keep the weight consistent and even across the target which can be very difficult if you do it manually. Using a banding engine will ensure that your target will be effective in stopping an arrow.
Target
If you do not have an way to a banding machine, you can just set a sturdy wooden board (plywood) on top of the stack of foam and then add essential weight (cinder or blocks). Keep adding weight until you can see that the materials are tightly compressed. The last step in manufacture a foam archery target is to bind the board and weights to the target using a strong rope. Tighten the rope and derive it. You can use a heavy duty tape (duct tape) to ensure that the rope is secured in place. Your complete target should be at least two feet thick.
How to Make Your Own Foam Archery Target
No comments:
Post a Comment